`turtle` — Turtle graphics¶

Introduction¶

Turtle graphics is an implementation of the popular geometric drawing tools introduced in Logo, developed by Wally Feurzeig, Seymour Papert and Cynthia Solomon in 1967.

This is an optional module. If it is missing from your copy of CPython, look for documentation from your distributor (that is, whoever provided Python to you). If you are the distributor, see Requirements for optional modules.

Get started¶

Imagine a robotic turtle starting at (0, 0) in the x-y plane. After an import turtle, give it the command turtle.forward(15), and it moves (on-screen!) 15 pixels in the direction it is facing, drawing a line as it moves. Give it the command turtle.right(25), and it rotates in-place 25 degrees clockwise.

In Python, turtle graphics provides a representation of a physical “turtle” (a little robot with a pen) that draws on a sheet of paper on the floor.

It’s an effective and well-proven way for learners to encounter programming concepts and interaction with software, as it provides instant, visible feedback. It also provides convenient access to graphical output in general.

Turtle drawing was originally created as an educational tool, to be used by teachers in the classroom. For the programmer who needs to produce some graphical output it can be a way to do that without the overhead of introducing more complex or external libraries into their work.

Tutorial¶

New users should start here. In this tutorial we’ll explore some of the basics of turtle drawing.

Starting a turtle environment¶

In a Python shell, import all the objects of the turtle module:

from turtle import *

If you run into a No module named '_tkinter' error, you’ll have to install the Tk interface package on your system.

Basic drawing¶

Send the turtle forward 100 steps:

forward(100)

You should see (most likely, in a new window on your display) a line drawn by the turtle, heading East. Change the direction of the turtle, so that it turns 120 degrees left (anti-clockwise):

left(120)

Let’s continue by drawing a triangle:

forward(100)
left(120)
forward(100)

Notice how the turtle, represented by an arrow, points in different directions as you steer it.

Experiment with those commands, and also with backward() and right().

Pen control¶

Try changing the color - for example, color('blue') - and width of the line - for example, width(3) - and then drawing again.

You can also move the turtle around without drawing, by lifting up the pen: up() before moving. To start drawing again, use down().

The turtle’s position¶

Send your turtle back to its starting-point (useful if it has disappeared off-screen):

home()

The home position is at the center of the turtle’s screen. If you ever need to know them, get the turtle’s x-y coordinates with:

pos()

Home is at (0, 0).

And after a while, it will probably help to clear the window so we can start anew:

clearscreen()

Making algorithmic patterns¶

Using loops, it’s possible to build up geometric patterns:

for steps in range(100):
    for c in ('blue', 'red', 'green'):
        color(c)
        forward(steps)
        right(30)

- which of course, are limited only by the imagination!

Let’s draw the star shape at the top of this page. We want red lines, filled in with yellow:

color('red')
fillcolor('yellow')

Just as up() and down() determine whether lines will be drawn, filling can be turned on and off:

begin_fill()

Next we’ll create a loop:

while True:
    forward(200)
    left(170)
    if abs(pos()) < 1:
        break

abs(pos()) < 1 is a good way to know when the turtle is back at its home position.

Finally, complete the filling:

end_fill()

(Note that filling only actually takes place when you give the end_fill() command.)

How to…¶

This section covers some typical turtle use-cases and approaches.

Get started as quickly as possible¶

One of the joys of turtle graphics is the immediate, visual feedback that’s available from simple commands - it’s an excellent way to introduce children to programming ideas, with a minimum of overhead (not just children, of course).

The turtle module makes this possible by exposing all its basic functionality as functions, available with from turtle import *. The turtle graphics tutorial covers this approach.

It’s worth noting that many of the turtle commands also have even more terse equivalents, such as fd() for forward(). These are especially useful when working with learners for whom typing is not a skill.

You’ll need to have the Tk interface package installed on your system for turtle graphics to work. Be warned that this is not always straightforward, so check this in advance if you’re planning to use turtle graphics with a learner.

Automatically begin and end filling¶

Starting with Python 3.14, you can use the fill() context manager instead of begin_fill() and end_fill() to automatically begin and end fill. Here is an example:

with fill():
    for i in range(4):
        forward(100)
        right(90)

forward(200)

The code above is equivalent to:

begin_fill()
for i in range(4):
    forward(100)
    right(90)
end_fill()

forward(200)

Use the `turtle` module namespace¶

Using from turtle import * is convenient - but be warned that it imports a rather large collection of objects, and if you’re doing anything but turtle graphics you run the risk of a name conflict (this becomes even more an issue if you’re using turtle graphics in a script where other modules might be imported).

The solution is to use import turtle - fd() becomes turtle.fd(), width() becomes turtle.width() and so on. (If typing “turtle” over and over again becomes tedious, use for example import turtle as t instead.)

Use turtle graphics in a script¶

It’s recommended to use the turtle module namespace as described immediately above, for example:

import turtle as t
from random import random

for i in range(100):
    steps = int(random() * 100)
    angle = int(random() * 360)
    t.right(angle)
    t.fd(steps)

Another step is also required though - as soon as the script ends, Python will also close the turtle’s window. Add:

t.mainloop()

to the end of the script. The script will now wait to be dismissed and will not exit until it is terminated, for example by closing the turtle graphics window.

Use object-oriented turtle graphics¶

Turtle graphics reference¶

Note

In the following documentation the argument list for functions is given. Methods, of course, have the additional first argument self which is omitted here.

Turtle methods¶

Turtle motion

Move and draw: forward() | fd()

backward() | bk() | back()

right() | rt()

left() | lt()

goto() | setpos() | setposition()

teleport()

setx()

sety()

setheading() | seth()

home()

circle()

dot()

stamp()

clearstamp()

clearstamps()

undo()

speed()
Tell Turtle’s state: position() | pos()

towards()

xcor()

ycor()

heading()

distance()
Setting and measurement: degrees()

radians()

Pen control

Drawing state: pendown() | pd() | down()

penup() | pu() | up()

pensize() | width()

pen()

isdown()
Color control: color()

pencolor()

fillcolor()
Filling: filling()

fill()

begin_fill()

end_fill()
More drawing control: reset()

clear()

write()

Turtle state

Visibility: showturtle() | st()

hideturtle() | ht()

isvisible()
Appearance: shape()

resizemode()

shapesize() | turtlesize()

shearfactor()

tiltangle()

tilt()

shapetransform()

get_shapepoly()

Using events

onclick()
onrelease()
ondrag()

Special Turtle methods

poly()
begin_poly()
end_poly()
get_poly()
clone()
getturtle() | getpen()
getscreen()
setundobuffer()
undobufferentries()

Methods of TurtleScreen/Screen¶

Window control: bgcolor()

bgpic()

clearscreen()

resetscreen()

screensize()

setworldcoordinates()
Animation control: no_animation()

delay()

tracer()

update()
Using screen events: listen()

onkey() | onkeyrelease()

onkeypress()

onclick() | onscreenclick()

ontimer()

mainloop() | done()
Settings and special methods: mode()

colormode()

getcanvas()

getshapes()

register_shape() | addshape()

turtles()

window_height()

window_width()
Input methods: textinput()

numinput()
Methods specific to Screen: bye()

exitonclick()

save()

setup()

title()

Methods of RawTurtle/Turtle and corresponding functions¶

Most of the examples in this section refer to a Turtle instance called turtle.

Turtle motion¶

turtle.forward(distance)¶

turtle.fd(distance)¶

Parameters:: distance – a number (integer or float)

Move the turtle forward by the specified distance, in the direction the turtle is headed.

>>> turtle.position()
(0.00,0.00)
>>> turtle.forward(25)
>>> turtle.position()
(25.00,0.00)
>>> turtle.forward(-75)
>>> turtle.position()
(-50.00,0.00)

turtle.back(distance)¶

turtle.bk(distance)¶

turtle.backward(distance)¶

Parameters:: distance – a number

Move the turtle backward by distance, opposite to the direction the turtle is headed. Do not change the turtle’s heading.

>>> turtle.position()
(0.00,0.00)
>>> turtle.backward(30)
>>> turtle.position()
(-30.00,0.00)

turtle.right(angle)¶

turtle.rt(angle)¶

Parameters:: angle – a number (integer or float)

Turn turtle right by angle units. (Units are by default degrees, but can be set via the degrees() and radians() functions.) Angle orientation depends on the turtle mode, see mode().

>>> turtle.heading()
22.0
>>> turtle.right(45)
>>> turtle.heading()
337.0

turtle.left(angle)¶

turtle.lt(angle)¶

Parameters:: angle – a number (integer or float)

Turn turtle left by angle units. (Units are by default degrees, but can be set via the degrees() and radians() functions.) Angle orientation depends on the turtle mode, see mode().

>>> turtle.heading()
22.0
>>> turtle.left(45)
>>> turtle.heading()
67.0

turtle.goto(x, y=None)¶

turtle.setpos(x, y=None)¶

turtle.setposition(x, y=None)¶

Parameters:

x – a number or a pair/vector of numbers
y – a number or None

If y is None, x must be a pair of coordinates or a Vec2D (e.g. as returned by pos()).

Move turtle to an absolute position. If the pen is down, draw line. Do not change the turtle’s orientation.

>>> tp = turtle.pos()
>>> tp
(0.00,0.00)
>>> turtle.setpos(60,30)
>>> turtle.pos()
(60.00,30.00)
>>> turtle.setpos((20,80))
>>> turtle.pos()
(20.00,80.00)
>>> turtle.setpos(tp)
>>> turtle.pos()
(0.00,0.00)

turtle.teleport(x, y=None, *, fill_gap=False)¶

Parameters:

x – a number or None
y – a number or None
fill_gap – a boolean

Move turtle to an absolute position. Unlike goto(x, y), a line will not be drawn. The turtle’s orientation does not change. If currently filling, the polygon(s) teleported from will be filled after leaving, and filling will begin again after teleporting. This can be disabled with fill_gap=True, which makes the imaginary line traveled during teleporting act as a fill barrier like in goto(x, y).

>>> tp = turtle.pos()
>>> tp
(0.00,0.00)
>>> turtle.teleport(60)
>>> turtle.pos()
(60.00,0.00)
>>> turtle.teleport(y=10)
>>> turtle.pos()
(60.00,10.00)
>>> turtle.teleport(20, 30)
>>> turtle.pos()
(20.00,30.00)

Added in version 3.12.

turtle.setx(x)¶

Parameters:: x – a number (integer or float)

Set the turtle’s first coordinate to x, leave second coordinate unchanged.

>>> turtle.position()
(0.00,240.00)
>>> turtle.setx(10)
>>> turtle.position()
(10.00,240.00)

turtle.sety(y)¶

Parameters:: y – a number (integer or float)

Set the turtle’s second coordinate to y, leave first coordinate unchanged.

>>> turtle.position()
(0.00,40.00)
>>> turtle.sety(-10)
>>> turtle.position()
(0.00,-10.00)

turtle.setheading(to_angle)¶

turtle.seth(to_angle)¶

Parameters:: to_angle – a number (integer or float)

Set the orientation of the turtle to to_angle. Here are some common directions in degrees:

standard mode	logo mode
0 - east	0 - north
90 - north	90 - east
180 - west	180 - south
270 - south	270 - west

>>> turtle.setheading(90)
>>> turtle.heading()
90.0

turtle.home()¶

Move turtle to the origin – coordinates (0,0) – and set its heading to its start-orientation (which depends on the mode, see mode()).

>>> turtle.heading()
90.0
>>> turtle.position()
(0.00,-10.00)
>>> turtle.home()
>>> turtle.position()
(0.00,0.00)
>>> turtle.heading()
0.0

turtle.circle(radius, extent=None, steps=None)¶

Parameters:

radius – a number
extent – a number (or None)
steps – an integer (or None)

Draw a circle with given radius. The center is radius units left of the turtle; extent – an angle – determines which part of the circle is drawn. If extent is not given, draw the entire circle. If extent is not a full circle, one endpoint of the arc is the current pen position. Draw the arc in counterclockwise direction if radius is positive, otherwise in clockwise direction. Finally the direction of the turtle is changed by the amount of extent.

As the circle is approximated by an inscribed regular polygon, steps determines the number of steps to use. If not given, it will be calculated automatically. May be used to draw regular polygons.

>>> turtle.home()
>>> turtle.position()
(0.00,0.00)
>>> turtle.heading()
0.0
>>> turtle.circle(50)
>>> turtle.position()
(-0.00,0.00)
>>> turtle.heading()
0.0
>>> turtle.circle(120, 180)  # draw a semicircle
>>> turtle.position()
(0.00,240.00)
>>> turtle.heading()
180.0

turtle.dot()¶

turtle.dot(size)

turtle.dot(color, /)

turtle.dot(size, color, /)

turtle.dot(size, r, g, b, /)

Parameters:

size – an integer >= 1 (if given)
color – a colorstring or a numeric color tuple

Draw a circular dot with diameter size, using color. If size is not given, the maximum of pensize+4 and 2*pensize is used.

>>> turtle.home()
>>> turtle.dot()
>>> turtle.fd(50); turtle.dot(20, "blue"); turtle.fd(50)
>>> turtle.position()
(100.00,-0.00)
>>> turtle.heading()
0.0

turtle.stamp()¶

Stamp a copy of the turtle shape onto the canvas at the current turtle position. Return a stamp_id for that stamp, which can be used to delete it by calling clearstamp(stamp_id).

>>> turtle.color("blue")
>>> stamp_id = turtle.stamp()
>>> turtle.fd(50)

turtle.clearstamp(stampid)¶

Parameters:: stampid – an integer, must be return value of previous stamp() call

Delete stamp with given stampid.

>>> turtle.position()
(150.00,-0.00)
>>> turtle.color("blue")
>>> astamp = turtle.stamp()
>>> turtle.fd(50)
>>> turtle.position()
(200.00,-0.00)
>>> turtle.clearstamp(astamp)
>>> turtle.position()
(200.00,-0.00)

turtle.clearstamps(n=None)¶

Parameters:: n – an integer (or None)

Delete all or first/last n of turtle’s stamps. If n is None, delete all stamps, if n > 0 delete first n stamps, else if n < 0 delete last n stamps.

>>> for i in range(8):
...     unused_stamp_id = turtle.stamp()
...     turtle.fd(30)
>>> turtle.clearstamps(2)
>>> turtle.clearstamps(-2)
>>> turtle.clearstamps()

turtle.undo()¶

Undo (repeatedly) the last turtle action(s). Number of available undo actions is determined by the size of the undobuffer.

>>> for i in range(4):
...     turtle.fd(50); turtle.lt(80)
...
>>> for i in range(8):
...     turtle.undo()

turtle.speed(speed=None)¶

Parameters:: speed – an integer in the range 0..10 or a speedstring (see below)

Set the turtle’s speed to an integer value in the range 0..10. If no argument is given, return current speed.

If input is a number greater than 10 or smaller than 0.5, speed is set to 0. Speedstrings are mapped to speedvalues as follows:

“fastest”: 0
“fast”: 10
“normal”: 6
“slow”: 3
“slowest”: 1

Speeds from 1 to 10 enforce increasingly faster animation of line drawing and turtle turning.

Attention: speed = 0 means that no animation takes place. forward/back makes turtle jump and likewise left/right make the turtle turn instantly.

>>> turtle.speed()
3
>>> turtle.speed('normal')
>>> turtle.speed()
6
>>> turtle.speed(9)
>>> turtle.speed()
9

Tell Turtle’s state¶

turtle.position()¶

turtle.pos()¶

Return the turtle’s current location (x,y) (as a Vec2D vector).

>>> turtle.pos()
(440.00,-0.00)

turtle.towards(x, y=None)¶

Parameters:

x – a number or a pair/vector of numbers or a turtle instance
y – a number if x is a number, else None

Return the angle between the line from turtle position to position specified by (x,y), the vector or the other turtle. This depends on the turtle’s start orientation which depends on the mode - “standard”/”world” or “logo”.

>>> turtle.goto(10, 10)
>>> turtle.towards(0,0)
225.0

turtle.xcor()¶

Return the turtle’s x coordinate.

>>> turtle.home()
>>> turtle.left(50)
>>> turtle.forward(100)
>>> turtle.pos()
(64.28,76.60)
>>> print(round(turtle.xcor(), 5))
64.27876

turtle.ycor()¶

Return the turtle’s y coordinate.

>>> turtle.home()
>>> turtle.left(60)
>>> turtle.forward(100)
>>> print(turtle.pos())
(50.00,86.60)
>>> print(round(turtle.ycor(), 5))
86.60254

turtle.heading()¶

Return the turtle’s current heading (value depends on the turtle mode, see mode()).

>>> turtle.home()
>>> turtle.left(67)
>>> turtle.heading()
67.0

turtle.distance(x, y=None)¶

Parameters:

x – a number or a pair/vector of numbers or a turtle instance
y – a number if x is a number, else None

Return the distance from the turtle to (x,y), the given vector, or the given other turtle, in turtle step units.

>>> turtle.home()
>>> turtle.distance(30,40)
50.0
>>> turtle.distance((30,40))
50.0
>>> joe = Turtle()
>>> joe.forward(77)
>>> turtle.distance(joe)
77.0

Settings for measurement¶

turtle.degrees(fullcircle=360.0)¶

Parameters:: fullcircle – a number

Set angle measurement units, i.e. set number of “degrees” for a full circle. Default value is 360 degrees.

>>> turtle.home()
>>> turtle.left(90)
>>> turtle.heading()
90.0

>>> # Change angle measurement unit to grad (also known as gon,
>>> # grade, or gradian and equals 1/100-th of the right angle.)
>>> turtle.degrees(400.0)
>>> turtle.heading()
100.0
>>> turtle.degrees(360)
>>> turtle.heading()
90.0

turtle.radians()¶

Set the angle measurement units to radians. Equivalent to degrees(2*math.pi).

>>> turtle.home()
>>> turtle.left(90)
>>> turtle.heading()
90.0
>>> turtle.radians()
>>> turtle.heading()
1.5707963267948966

Pen control¶

Drawing state¶

turtle.pendown()¶
turtle.pd()¶
turtle.down()¶: Pull the pen down – drawing when moving.

turtle.penup()¶
turtle.pu()¶
turtle.up()¶: Pull the pen up – no drawing when moving.

turtle.pensize(width=None)¶

turtle.width(width=None)¶

Parameters:: width – a positive number

Set the line thickness to width or return it. If resizemode is set to “auto” and turtleshape is a polygon, that polygon is drawn with the same line thickness. If no argument is given, the current pensize is returned.

>>> turtle.pensize()
1
>>> turtle.pensize(10)   # from here on lines of width 10 are drawn

turtle.pen(pen=None, **pendict)¶

Parameters:

pen – a dictionary with some or all of the below listed keys
pendict – one or more keyword-arguments with the below listed keys as keywords

Return or set the pen’s attributes in a “pen-dictionary” with the following key/value pairs:

“shown”: True/False
“pendown”: True/False
“pencolor”: color-string or color-tuple
“fillcolor”: color-string or color-tuple
“pensize”: positive number
“speed”: number in range 0..10
“resizemode”: “auto” or “user” or “noresize”
“stretchfactor”: (positive number, positive number)
“outline”: positive number
“tilt”: number

This dictionary can be used as argument for a subsequent call to pen() to restore the former pen-state. Moreover one or more of these attributes can be provided as keyword-arguments. This can be used to set several pen attributes in one statement.

>>> turtle.pen(fillcolor="black", pencolor="red", pensize=10)
>>> sorted(turtle.pen().items())
[('fillcolor', 'black'), ('outline', 1), ('pencolor', 'red'),
 ('pendown', True), ('pensize', 10), ('resizemode', 'noresize'),
 ('shearfactor', 0.0), ('shown', True), ('speed', 9),
 ('stretchfactor', (1.0, 1.0)), ('tilt', 0.0)]
>>> penstate=turtle.pen()
>>> turtle.color("yellow", "")
>>> turtle.penup()
>>> sorted(turtle.pen().items())[:3]
[('fillcolor', ''), ('outline', 1), ('pencolor', 'yellow')]
>>> turtle.pen(penstate, fillcolor="green")
>>> sorted(turtle.pen().items())[:3]
[('fillcolor', 'green'), ('outline', 1), ('pencolor', 'red')]

turtle.isdown()¶

Return True if pen is down, False if it’s up.

>>> turtle.penup()
>>> turtle.isdown()
False
>>> turtle.pendown()
>>> turtle.isdown()
True

Color control¶

turtle.pencolor()¶

turtle.pencolor(color, /)

turtle.pencolor(r, g, b, /)

Return or set the pencolor.

Four input formats are allowed:

pencolor(): Return the current pencolor as color specification string or as a tuple (see example). May be used as input to another color/pencolor/fillcolor/bgcolor call.
pencolor(colorstring): Set pencolor to colorstring, which is a Tk color specification string, such as "red", "yellow", or "#33cc8c".
pencolor((r, g, b)): Set pencolor to the RGB color represented by the tuple of r, g, and b. Each of r, g, and b must be in the range 0..colormode, where colormode is either 1.0 or 255 (see colormode()).
pencolor(r, g, b): Set pencolor to the RGB color represented by r, g, and b. Each of r, g, and b must be in the range 0..colormode.

If turtleshape is a polygon, the outline of that polygon is drawn with the newly set pencolor.

>>> colormode()
1.0
>>> turtle.pencolor()
'red'
>>> turtle.pencolor("brown")
>>> turtle.pencolor()
'brown'
>>> tup = (0.2, 0.8, 0.55)
>>> turtle.pencolor(tup)
>>> turtle.pencolor()
(0.2, 0.8, 0.5490196078431373)
>>> colormode(255)
>>> turtle.pencolor()
(51.0, 204.0, 140.0)
>>> turtle.pencolor('#32c18f')
>>> turtle.pencolor()
(50.0, 193.0, 143.0)

turtle.fillcolor()¶

turtle.fillcolor(color, /)

turtle.fillcolor(r, g, b, /)

Return or set the fillcolor.

Four input formats are allowed:

fillcolor(): Return the current fillcolor as color specification string, possibly in tuple format (see example). May be used as input to another color/pencolor/fillcolor/bgcolor call.
fillcolor(colorstring): Set fillcolor to colorstring, which is a Tk color specification string, such as "red", "yellow", or "#33cc8c".
fillcolor((r, g, b)): Set fillcolor to the RGB color represented by the tuple of r, g, and b. Each of r, g, and b must be in the range 0..colormode, where colormode is either 1.0 or 255 (see colormode()).
fillcolor(r, g, b): Set fillcolor to the RGB color represented by r, g, and b. Each of r, g, and b must be in the range 0..colormode.

If turtleshape is a polygon, the interior of that polygon is drawn with the newly set fillcolor.

>>> turtle.fillcolor("violet")
>>> turtle.fillcolor()
'violet'
>>> turtle.pencolor()
(50.0, 193.0, 143.0)
>>> turtle.fillcolor((50, 193, 143))  # Integers, not floats
>>> turtle.fillcolor()
(50.0, 193.0, 143.0)
>>> turtle.fillcolor('#ffffff')
>>> turtle.fillcolor()
(255.0, 255.0, 255.0)

turtle.color()¶

turtle.color(color, /)

turtle.color(r, g, b, /)

turtle.color(pencolor, fillcolor, /)

Return or set pencolor and fillcolor.

Several input formats are allowed. They use 0 to 3 arguments as follows:

color(): Return the current pencolor and the current fillcolor as a pair of color specification strings or tuples as returned by pencolor() and fillcolor().
color(colorstring), color((r,g,b)), color(r,g,b): Inputs as in pencolor(), set both, fillcolor and pencolor, to the given value.
color(colorstring1, colorstring2), color((r1,g1,b1), (r2,g2,b2)): Equivalent to pencolor(colorstring1) and fillcolor(colorstring2) and analogously if the other input format is used.

If turtleshape is a polygon, outline and interior of that polygon is drawn with the newly set colors.

>>> turtle.color("red", "green")
>>> turtle.color()
('red', 'green')
>>> color("#285078", "#a0c8f0")
>>> color()
((40.0, 80.0, 120.0), (160.0, 200.0, 240.0))

Filling¶

turtle.filling()¶

Return fillstate (True if filling, False else).

>>> turtle.begin_fill()
>>> if turtle.filling():
...    turtle.pensize(5)
... else:
...    turtle.pensize(3)

turtle.fill()¶

Fill the shape drawn in the with turtle.fill(): block.

>>> turtle.color("black", "red")
>>> with turtle.fill():
...     turtle.circle(80)

Using fill() is equivalent to adding the begin_fill() before the fill-block and end_fill() after the fill-block:

>>> turtle.color("black", "red")
>>> turtle.begin_fill()
>>> turtle.circle(80)
>>> turtle.end_fill()

Added in version 3.14.

turtle.begin_fill()¶: To be called just before drawing a shape to be filled.

turtle.end_fill()¶

Fill the shape drawn after the last call to begin_fill().

Whether or not overlap regions for self-intersecting polygons or multiple shapes are filled depends on the operating system graphics, type of overlap, and number of overlaps. For example, the Turtle star above may be either all yellow or have some white regions.

>>> turtle.color("black", "red")
>>> turtle.begin_fill()
>>> turtle.circle(80)
>>> turtle.end_fill()

More drawing control¶

turtle.reset()¶

Delete the turtle’s drawings from the screen, re-center the turtle and set variables to the default values.

>>> turtle.goto(0,-22)
>>> turtle.left(100)
>>> turtle.position()
(0.00,-22.00)
>>> turtle.heading()
100.0
>>> turtle.reset()
>>> turtle.position()
(0.00,0.00)
>>> turtle.heading()
0.0

turtle.clear()¶: Delete the turtle’s drawings from the screen. Do not move turtle. State and position of the turtle as well as drawings of other turtles are not affected.

turtle.write(arg, move=False, align='left', font=('Arial', 8, 'normal'))¶

Parameters:

arg – object to be written to the TurtleScreen
move – True/False
align – one of the strings “left”, “center” or right”
font – a triple (fontname, fontsize, fonttype)

Write text - the string representation of arg - at the current turtle position according to align (“left”, “center” or “right”) and with the given font. If move is true, the pen is moved to the bottom-right corner of the text. By default, move is False.

>>> turtle.write("Home = ", True, align="center")
>>> turtle.write((0,0), True)

Turtle state¶

Visibility¶

turtle.hideturtle()¶

turtle.ht()¶

Make the turtle invisible. It’s a good idea to do this while you’re in the middle of doing some complex drawing, because hiding the turtle speeds up the drawing observably.

>>> turtle.hideturtle()

turtle.showturtle()¶

turtle.st()¶

Make the turtle visible.

>>> turtle.showturtle()

turtle.isvisible()¶

Return True if the Turtle is shown, False if it’s hidden.

>>> turtle.hideturtle()
>>> turtle.isvisible()
False
>>> turtle.showturtle()
>>> turtle.isvisible()
True

Appearance¶

turtle.shape(name=None)¶

Parameters:: name – a string which is a valid shapename

Set turtle shape to shape with given name or, if name is not given, return name of current shape. Shape with name must exist in the TurtleScreen’s shape dictionary. Initially there are the following polygon shapes: “arrow”, “turtle”, “circle”, “square”, “triangle”, “classic”. To learn about how to deal with shapes see Screen method register_shape().

>>> turtle.shape()
'classic'
>>> turtle.shape("turtle")
>>> turtle.shape()
'turtle'

turtle.resizemode(rmode=None)¶

Parameters:: rmode – one of the strings “auto”, “user”, “noresize”

Set resizemode to one of the values: “auto”, “user”, “noresize”. If rmode is not given, return current resizemode. Different resizemodes have the following effects:

“auto”: adapts the appearance of the turtle corresponding to the value of pensize.
“user”: adapts the appearance of the turtle according to the values of stretchfactor and outlinewidth (outline), which are set by shapesize().
“noresize”: no adaption of the turtle’s appearance takes place.

resizemode("user") is called by shapesize() when used with arguments.

>>> turtle.resizemode()
'noresize'
>>> turtle.resizemode("auto")
>>> turtle.resizemode()
'auto'

turtle.shapesize(stretch_wid=None, stretch_len=None, outline=None)¶

turtle.turtlesize(stretch_wid=None, stretch_len=None, outline=None)¶

Parameters:

stretch_wid – positive number
stretch_len – positive number
outline – positive number

Return or set the pen’s attributes x/y-stretchfactors and/or outline. Set resizemode to “user”. If and only if resizemode is set to “user”, the turtle will be displayed stretched according to its stretchfactors: stretch_wid is stretchfactor perpendicular to its orientation, stretch_len is stretchfactor in direction of its orientation, outline determines the width of the shape’s outline.

>>> turtle.shapesize()
(1.0, 1.0, 1)
>>> turtle.resizemode("user")
>>> turtle.shapesize(5, 5, 12)
>>> turtle.shapesize()
(5, 5, 12)
>>> turtle.shapesize(outline=8)
>>> turtle.shapesize()
(5, 5, 8)

turtle.shearfactor(shear=None)¶

Parameters:: shear – number (optional)

Set or return the current shearfactor. Shear the turtleshape according to the given shearfactor shear, which is the tangent of the shear angle. Do not change the turtle’s heading (direction of movement). If shear is not given: return the current shearfactor, i. e. the tangent of the shear angle, by which lines parallel to the heading of the turtle are sheared.

>>> turtle.shape("circle")
>>> turtle.shapesize(5,2)
>>> turtle.shearfactor(0.5)
>>> turtle.shearfactor()
0.5

turtle.tilt(angle)¶

Parameters:: angle – a number

Rotate the turtleshape by angle from its current tilt-angle, but do not change the turtle’s heading (direction of movement).

>>> turtle.reset()
>>> turtle.shape("circle")
>>> turtle.shapesize(5,2)
>>> turtle.tilt(30)
>>> turtle.fd(50)
>>> turtle.tilt(30)
>>> turtle.fd(50)

turtle.tiltangle(angle=None)¶

Parameters:: angle – a number (optional)

Set or return the current tilt-angle. If angle is given, rotate the turtleshape to point in the direction specified by angle, regardless of its current tilt-angle. Do not change the turtle’s heading (direction of movement). If angle is not given: return the current tilt-angle, i. e. the angle between the orientation of the turtleshape and the heading of the turtle (its direction of movement).

>>> turtle.reset()
>>> turtle.shape("circle")
>>> turtle.shapesize(5,2)
>>> turtle.tilt(45)
>>> turtle.tiltangle()
45.0

turtle.shapetransform(t11=None, t12=None, t21=None, t22=None)¶

Parameters:

t11 – a number (optional)
t12 – a number (optional)
t21 – a number (optional)
t12 – a number (optional)

Set or return the current transformation matrix of the turtle shape.

If none of the matrix elements are given, return the transformation matrix as a tuple of 4 elements. Otherwise set the given elements and transform the turtleshape according to the matrix consisting of first row t11, t12 and second row t21, t22. The determinant t11 * t22 - t12 * t21 must not be zero, otherwise an error is raised. Modify stretchfactor, shearfactor and tiltangle according to the given matrix.

>>> turtle = Turtle()
>>> turtle.shape("square")
>>> turtle.shapesize(4,2)
>>> turtle.shearfactor(-0.5)
>>> turtle.shapetransform()
(4.0, -1.0, -0.0, 2.0)

turtle.get_shapepoly()¶

Return the current shape polygon as tuple of coordinate pairs. This can be used to define a new shape or components of a compound shape.

>>> turtle.shape("square")
>>> turtle.shapetransform(4, -1, 0, 2)
>>> turtle.get_shapepoly()
((50, -20), (30, 20), (-50, 20), (-30, -20))

Using events¶

turtle.onclick(fun, btn=1, add=None)

Parameters:

fun – a function with two arguments which will be called with the coordinates of the clicked point on the canvas
btn – number of the mouse-button, defaults to 1 (left mouse button)
add – True or False – if True, a new binding will be added, otherwise it will replace a former binding

Bind fun to mouse-click events on this turtle. If fun is None, existing bindings are removed. Example for the anonymous turtle, i.e. the procedural way:

>>> def turn(x, y):
...     left(180)
...
>>> onclick(turn)  # Now clicking into the turtle will turn it.
>>> onclick(None)  # event-binding will be removed

turtle.onrelease(fun, btn=1, add=None)¶

Parameters:

fun – a function with two arguments which will be called with the coordinates of the clicked point on the canvas
btn – number of the mouse-button, defaults to 1 (left mouse button)
add – True or False – if True, a new binding will be added, otherwise it will replace a former binding

Bind fun to mouse-button-release events on this turtle. If fun is None, existing bindings are removed.

>>> class MyTurtle(Turtle):
...     def glow(self,x,y):
...         self.fillcolor("red")
...     def unglow(self,x,y):
...         self.fillcolor("")
...
>>> turtle = MyTurtle()
>>> turtle.onclick(turtle.glow)     # clicking on turtle turns fillcolor red,
>>> turtle.onrelease(turtle.unglow) # releasing turns it to transparent.

turtle.ondrag(fun, btn=1, add=None)¶

Parameters:

fun – a function with two arguments which will be called with the coordinates of the clicked point on the canvas
btn – number of the mouse-button, defaults to 1 (left mouse button)
add – True or False – if True, a new binding will be added, otherwise it will replace a former binding

Bind fun to mouse-move events on this turtle. If fun is None, existing bindings are removed.

Remark: Every sequence of mouse-move-events on a turtle is preceded by a mouse-click event on that turtle.

>>> turtle.ondrag(turtle.goto)

Subsequently, clicking and dragging the Turtle will move it across the screen thereby producing handdrawings (if pen is down).

Special Turtle methods¶

turtle.poly()¶

Record the vertices of a polygon drawn in the with turtle.poly(): block. The first and last vertices will be connected.

>>> with turtle.poly():
...     turtle.forward(100)
...     turtle.right(60)
...     turtle.forward(100)

Added in version 3.14.

turtle.begin_poly()¶: Start recording the vertices of a polygon. Current turtle position is first vertex of polygon.

turtle.end_poly()¶: Stop recording the vertices of a polygon. Current turtle position is last vertex of polygon. This will be connected with the first vertex.

turtle.get_poly()¶

Return the last recorded polygon.

>>> turtle.home()
>>> turtle.begin_poly()
>>> turtle.fd

turtle — Turtle graphics¶

Introduction¶

Get started¶

Tutorial¶

Starting a turtle environment¶

Basic drawing¶

Pen control¶

The turtle’s position¶

Making algorithmic patterns¶

How to…¶

Get started as quickly as possible¶

Automatically begin and end filling¶

Use the turtle module namespace¶

Use turtle graphics in a script¶

Use object-oriented turtle graphics¶

Turtle graphics reference¶

Turtle methods¶

Methods of TurtleScreen/Screen¶

Methods of RawTurtle/Turtle and corresponding functions¶

Turtle motion¶

Tell Turtle’s state¶

Settings for measurement¶

Pen control¶

Drawing state¶

Color control¶

Filling¶

More drawing control¶

Turtle state¶

Visibility¶

Appearance¶

Using events¶

Special Turtle methods¶

`turtle` — Turtle graphics¶

Use the `turtle` module namespace¶